Image shown for illustration purposes only. Product label details may differ slightly on actual product purchased.
ND3034HD25
14.4V 2.5Ah (36.0Wh) Lithium Ion Battery (<10.0A capable)
The ND3034HD25 is a 14.4V 2.6Ah (36.0Wh) Lithium ion smart battery which can be designed into a wide range of products and equipment. The battery comprises four 3.6V 2.5Ah 18650 cells in a 4-series, 1-parallel array and can deliver up to 10A of discharge current. The internal battery management system (BMS) is System Management Bus (SMBus) and Smart Battery System (SBS) compliant and can operate as part of a smart battery system along with a compatible smart charger and host device. The BMS provides cell and battery level protection against over-voltage, under-voltage, over-current, short-circuit and over-temperature. The communication interface allows a host device to read pertinent battery data such as Runtime to Empty (minutes), Full Charge Capacity (mAh) and Relative State of Charge (%) which are provided by the impedance tracking fuel gauge. In addition, a wealth of other calculated and static data is available making the battery an active part of any power management system. When connected to a smart charger, the battery broadcasts its required Charging Voltage (mV) and Charging Current (mA) which the charger provides until commanded to stop charging. Externally, the battery has a UL94V-0 rated black plastic enclosure and features an industry standard 5-way connector interface for power and communication. Both right angled and vertical mating connectors are available as accessories. A 5-segment LCD display on the end of the battery provides the user with an easy way of viewing remaining battery capacity in 20% segments. The ND3034HD25 meets the requirements of UN38.3 (transportation), is CE marked and RoHS / WEEE compliant. Learn more about our ND2034 and ND3034 batteries
Stock Available
Product
1 - 11
12 - 23
299EGAEB310A
£214.58
£137.21
Add
2 bay embedded smart charger (no pass through) 24V I/P
299EGAEB325A
£220.32
£142.79
Add
2 bay embedded smart charger (with pass through) 24V I/P
299EGAEB330A
£120.26
£95.60
Add
1 bay embedded smart charger (no pass through) 24V I/P
299EGAEB335A
£138.63
£113.46
Add
1 bay embedded smart charger (with pass though) 10-24V I/P
299EGAEB343A
£126.00
£101.18
Add
1 bay embedded smart charger (with pass through) 24V I/P
610005
£5.86
£5.86
Add
Tyco 5787446-1 connector for N-Series batteries
610007
£7.18
£7.18
Add
Tyco 5787422-1 connector for N-Series batteries
610018
£5.80
£5.80
Add
Tyco 5787428-1 connector for N-Series batteries
629080
£22.96
£22.96
Add
Five wire straight cable for N203/N303 series batteries
936188
£1.72
£1.72
Add
Safety travel / dust cap for N203 / N303 series batteries
936192
£1.15
£1.15
Add
Mounting block for N202/N302/N203/N303 series batteries
ATA004N
£367.48
£367.48
Add
USB port smart battery reader/writer for N-series batteries (with connection to battery & charger)
BL237A
£1.15
£1.15
Add
PCB for Tyco smart battery connectors
CH1000X
£156.51
£156.51
Add
Single bay standard smart charger / calibrator
CH4000X
£130.74
£130.74
Add
Single bay standard smart charger
CH4040X
£263.71
£263.71
Add
Two bay standard smart charger
CH4444X
£683.18
£659.14
Add
Four bay standard smart charger
CH5000X
£156.51
£156.51
Add
Single bay standard smart charger / calibrator
CH5050X
£315.27
£315.27
Add
Two bay standard smart charger / calibrator
CH5555X
£722.42
£697.01
Add
Four bay standard smart charger / calibrator
CH6555CAL
£1,132.03
£1,072.98
Add
Six bay standard smart charger/calibrator with 30% SoC Function
CH6555X
£1,103.81
£1,045.25
Add
Six bay standard smart charger / calibrator
CH7000X
£156.96
£156.96
Add
Single bay standard smart charger
CR12F203
£1,726.16
£1,595.48
Add
12 Bay Rack Mounted Charger for NF2030 / ND2034 / ND2037
EB397
£12.70
£11.51
Add
Ideal Diode PCBA for N-Series batteries
Part number:
ND3034HD25
Chemistry:
Rechargeable Lithium Ion
Voltage (nominal):
14.4V
Capacity (nominal):
2.6Ah
Energy (nominal):
36.0Wh
Discharge current (maximum):
10.0A
Discharge power (maximum):
96.0W
Housing:
Injection moulded plastic
Length (maximum):
151.30mm
Width (maximum):
42.40mm
Height (maximum):
22.80mm
Recommended cavity cross section:
24.0 x 43.0
Weight (typical):
0.230Kg
Colour:
Black
Connector:
Tyco 5-way
Visual state of charge indicator:
Yes (5 bar LCD)
Communications:
SMBus (System Management Bus)
Data system:
SBS (Smart Battery Specification)
Over charge protection:
Yes
Over discharge protection:
Yes
Over current protection:
Yes
Over temperature protection:
Yes
Cell balancing function:
Yes
CE compliant:
Yes
UN 38.3 (transportation) certified:
Yes
UL 2054 (safety) certified:
Custom option (contact us)
IEC 62133 (safety) certified?:
Custom option (contact us)
UL 62133 (safety) certified?:
Custom option (contact us)
◾ 4 cell Lithium Ion battery
◾ Compact footprint
◾ 5-way Tyco connector interface
◾ LCD visual state of charge indicator
◾ Portable electronic devices
Product
1 - 11
12 - 23
ND3034HD26
£101.42
£101.42
View
14.4V 2.6Ah (37.4Wh) Lithium Ion Battery (<10.0A capable)