Image shown for illustration purposes only. Product label details may differ slightly on actual product purchased.
ND2057HD34 7.2V 6.8Ah (49.0Wh) Lithium Ion Battery (<8.0A capable) Status: 'Active' - Recommended for new device developments. The ND2057HD34 is a 7.2V 6.8Ah (49.0Wh) Lithium ion smart battery which can be designed into a wide range of products and equipment. The battery comprises four 3.6V 3.4Ah 18650 cells in a 2-series, 2-parallel array and can deliver up to 8A of discharge current. The internal battery management system (BMS) is System Management Bus (SMBus) and Smart Battery System (SBS) compliant and can operate as part of a smart battery system along with a compatible smart charger and host device. The BMS provides cell and battery level protection against over-voltage, under-voltage, over-current, short-circuit and over-temperature. The communication interface allows a host device to read pertinent battery data such as Runtime to Empty (minutes), Full Charge Capacity (mAh) and Relative State of Charge (%) which are provided by the impedance tracking fuel gauge. In addition, a wealth of other calculated and static data is available making the battery an active part of any power management system. When connected to a smart charger, the battery broadcasts its required Charging Voltage (mV) and Charging Current (mA) which the charger provides until commanded to stop charging. Externally, the battery has a UL94V-0 rated black plastic enclosure and features an industry standard 5-way connector interface for power and communication. Both right angled and vertical mating connectors are available as accessories. A 5-segment LCD display on the end of the battery provides the user with an easy way of viewing remaining battery capacity in 20% segments. The ND2057HD34 meets the requirements of UN38.3 (transportation), is CE marked and RoHS / WEEE compliant. If your end device requires the battery to be certified to IEC 62133 or if you require UL/CSA certification then please consider the ND2057QE34 . The ND2057HD34 has Inspired Energy livery as standard, however custom labelled versions of the battery can be created to meet your specific requirements. Customisation can include bespoke artwork, special regulatory certification or SHA-1 encryption, please contact us to discuss customisation of the ND2057HD34.
Stock Available Product 1 - 11 12 - 23 610005 £2.21 £2.21 Add Tyco 5787446-1 connector for N-Series batteries
610007 £2.21 £2.21 Add Tyco 5787422-1 connector for N-Series batteries
610018 £2.77 £2.77 Add Tyco 5787428-1 connector for N-Series batteries
629028 £22.12 £22.12 Add Five wire straight cable for N204/N304/N205/N305 series batteries
629030 £22.12 £22.12 Add Two wire coiled cable for N204/N304/N205/N305 series batteries
936143 £1.11 £1.11 Add Mounting block for N204/N304/N205/N305 series batteries
936186 £1.11 £1.11 Add Safety travel dust cap for N205 series batteries
BL237A £1.11 £1.11 Add PCB for Tyco smart battery connectors
CH1000X £138.11 £138.11 Add Single bay standard smart charger / calibrator
CH4000X £115.34 £115.34 Add Single bay standard smart charger
CH4040X £232.83 £232.83 Add Two bay standard smart charger
CH4444X £603.43 £582.20 Add Four bay standard smart charger
CH5000X £138.11 £138.11 Add Single bay standard smart charger / calibrator
CH5050CAL £290.51 £290.51 Add Two bay standard smart charger/calibrator with 30% SoC function
CH5050X £278.38 £278.38 Add Two bay standard smart charger / calibrator
CH5555CAL £669.60 £642.52 Add Four bay standard smart charger/calibrator with 30% SoC Function
CH5555X £640.32 £617.81 Add Four bay standard smart charger / calibrator
CH6555CAL £977.29 £925.50 Add Six bay standard smart charger/calibrator with 30% SoC Function
CH6555X £945.79 £900.78 Add Six bay standard smart charger / calibrator
CH7000X £138.51 £138.51 Add Single bay standard smart charger
CR12D205 £1,525.14 £1,409.57 Add 12 Bay Rack Mounted Charger for ND2053 / ND2054 / ND2057
EC9600 £172.66 £172.66 Add Handheld smart battery data reader for N-series batteries
Part number: ND2057HD34 Chemistry: Rechargeable Lithium Ion Voltage (nominal): 7.2V Capacity (nominal): 6.8Ah Energy (nominal): 49.0Wh Discharge current (maximum): 8.0A Discharge power (maximum): 38.4W Housing: Injection moulded plastic Length (maximum): 85.34mm Width (maximum): 77.64mm Height (maximum): 23.02mm Recommended cavity cross section: 24.0 x 80.0 Weight (typical): 0.240Kg Colour: Black Connector: Tyco 5-way Visual state of charge indicator: Yes (5 bar LCD) Communications: SMBus (System Management Bus) Data system: SBS (Smart Battery Specification) Over charge protection: Yes Over discharge protection: Yes Over current protection: Yes Over temperature protection: Yes Cell balancing function: Yes CE compliant: Yes UN 38.3 (transportation) certified: Yes UL 2054 (safety) certified: Custom option (contact us) IEC 62133 (safety) certified?: Custom option (contact us) UL 62133 (safety) certified?: Custom option (contact us)
◾ 4 cell Lithium Ion battery ◾ Compact footprint ◾ 5-way Tyco connector interface ◾ LCD visual state of charge indicator
◾ Portable electronic devices Product 1 - 11 12 - 23 ND2057QE34 £93.74 £93.74 View 7.2V 6.8Ah (49.0Wh) Lithium Ion Battery (<8.0A capable) Includes Certification to IEC 62133 & UL/CSA 62133