EC9600
Handheld smart battery data reader for N-Series batteries.
The EC9600 handheld smart battery reader is an open frame device which plugs directly into the 5-pin Tyco connector on any Inspired Energy N-Series smart battery. Powered by the battery itself, it provides a readout of the smart battery data system parameters held by the battery.
To find out more about this product or to request a quote, please contact us on +44 (0) 1782 566688 or email sales@accutronics.co.uk.
Product Specifications
| Weight | 65g |
| Height | 22mm |
| Length | 95mm |
| Width | 57mm |
| Display | 2 line, 16 character mono LCD display |
| Smart Battery Data Fields Supported | Manufacturer's Name Battery Name Battery Chemistry Smart Battery Spec Version # Serial Number Date Of Manufacture Reported Voltage (mV) Terminal Voltage (mV) Current (mA) Temperature (°K & °C) Thermistor Value (Ohms) Relative State of Charge (%) Remaining Capacity (mAh) Full Charge Capacity (mAh) Absolute State of Charge (%) Design Capacity (mAh) Design Voltage (mV) Battery State (hex) Battery Mode (hex) Cycle Count Max Error (%) Remaining Time to Empty (mins) Remaining Time To Full (mins) Charge Voltage (mV) (Value requested when on charge) Charge Current (mA) (Value requested when on charge) Remaining Capacity Alarm set point (mAh) Remaining Time Alarm set point (mins) |
Product Downloads
EC9600 Hyperterminal Instructions
Document describes how to connect the reader to a PC and use HyperTerminal to transfer battery data.
Download
Product Image(s)
Product Information
The EC9600 is the same device as an Inspired Energy ATA000.